Updating the Firmware
D131/D132/D133 5-16 SM
6. To select the item for upgrade, touch the selection on the touch panel, or push the
corresponding key on the 10-key pad (1 to 5) of the operation panel. The number in
parentheses tells you which key to push. When you make a selection, the [Verify(./*)] and
[Update(#)] buttons come on the screen.
If you push [Exit] (or the [0] key), you go back to the usual operation screen.
Push the [Start] key on the operation panel to select and download all the options shown
on the screen.
Push the [Clear] key on the operation panel if you want to cancel your selections and
make new ones.
"ROM": This is the number and other version information of the ROM firmware installed in
the machine at this time.
"NEW": This is the number and other version information of the firmware on the SD card.
7. With the selected items shown in reverse color, push the [Update] button or the [#] key on the
operation panel to start the update.
After you push [Update]:
The middle bar shows the name of the module that the machine updates at this time.
(The example above shows that the machine updates the "Printer" module at this time.)
To Next Page
Loading...
