Maintenance
Key No. Printer Web
7 4500 (PDL) 6600 (WebDB)
8 4600 (GPS-PM) 3300 (PTS)
9 2000 (NCS) 6666 (WebSys)
10 2224 (BCU) 2000 (NCS)
Key to Acronyms
Acronym Meaning
ECS Engine Control Service
GPS GW Print Service
GSP-PM GW Print Service – Print Module
IMH Image Memory Handler
MCS Memory Control Service
NCS Network Control Service
NFA Net File Application
PDL Printer Design Language
PTS Print Server
SCS System Control Service
SRM System Resource Management
WebDB Web Document Box (Document Server)
The machine is now set to record the debugging information automatically on the SD card or HDD
(the target selected with SP5857-002) for the events that you selected SP5858 and the memory
modules selected with SP5859.
Please keep the following important points in mind when you are doing this setting:
The initial settings are all zero.
These settings remain in effect until you change them. Be sure to check all the settings,
especially the settings for Keys 6 to 10. To switch off a key setting, enter a zero for that key.
To Next Page
Loading...
