Program Download
D131/D132/D133 6-20 SM
Display Details Recovery
44
Download Error
E44
Module ID Card No.
Download result failure 5 Turn the machine
power off/on.
Set controller
DIPSW-1 to ON to
force the machine
to write
If you cannot force
the machine to
write, replace the
controller board.
The data targeted for the write
operation could not be accessed.
50 No Valid Data E50
Download invalid
Use the correct
SD card.
The source data for the update
could not be authenticated.
51 (no display)
Remote ROM update failure 1
Turn the machine
power off/on and
try again.
The source data for the ROM
update is corrupted because the
machine is operating and an SC
code has been issued.
52 (no display)
Remote ROM update failure 2
Try again with the
correct data.
The source data received for the
ROM update is corrupted; it failed a
SUM check due to its abnormal
length.
53 (no display)
Download result failure 6
Do the download
procedure again.
The previous download in progress
was cancelled.
To Next Page
Loading...
