Service Call Conditions
D131/D132/D133 2-2 SM Appendix
Level Definition Reset Procedure
B
SCs that disable only the features that use the
defective item. Although these SCs are not
shown to the user under normal conditions, they
are displayed on the operation panel only when
the defective feature is selected.
Turn the main power switch
off/on.
C
SCs that are not shown on the operation panel.
They are internally logged.
Logging only
D
Turning the operation switch or the main power
switch off/on resets SCs Displayed on the
operation panel. These are re-displayed if the
error occurs again.
Turn the operation switch or
main power switch off/on.
To Next Page
Loading...
