Ricoh D131 - Page 610

SP2000 Drum
SM Appendix 3-35 D131/D132/D133
Appendix:
Service
Program
Mode Tables
13 On Timing: M-Thick
Adjusts the transfer current ON timing for copying with M-thick paper from the
LCT.
[–30 to +30/0/1 mm]
14 Leading Edge: M-Thick
Adjusts the area where the transfer current is applied for the leading edge
during copying with M-thick paper from the LCT.
[0 to +20/0/1 mm]
15 Trailing Edge:M-Thick
Adjusts the area where the transfer current is applied for the trailing edge
during copying with M-thick paper from the LCT.
[0 to +20/0/1 mm]
16 Off Timing: M-Thick
Adjusts the transfer current OFF timing for copying with M-thick paper from the
LCT.
[–30 to +30/15/1 mm]
17 On Timing: After Punch
Adjusts the transfer current ON timing for copying with punch from the LCT.
[–30 to +30/20/1 mm]
18 Leading Edge: After Punch
Adjusts the area where transfer current is applied for the leading edge during
copying with punch.
[0 to +20/0/1 mm]
19 Trailing Edge: After Punch
Adjusts the area where transfer current is applied for the trailing edge during
copying with punch.
[0 to +20/0/1 mm]