Ind Dot Erase: 0(Off) 1-7 (Weak – Strong)
This SP sets the level for removing dots when a color original is scanned with a
scanner software application. The higher the setting, the greater the effect
applied for removing background dots.
[0 to 7/0/1]
4600
1 SBU_ID
Displays the SBU ID code confirmed by reading the SBU after the SBU
adjusts automatically at power on.
[0 to FFh/1]
2 GASBU_N_ID
Displays the GASBU_N ID code confirmed by reading the SBU after the
SBU adjusts automatically at power on.
[0 to FFh/1]
3 VSP_F_ID
Displays the VSB5100_F ID code confirmed by reading the SBU after the
SBU adjusts automatically at power on.
[0 to FFh/1]
4 VSP_L_ID
Displays the VSB5100_L ID code confirmed by reading the SBU after the
SBU adjusts automatically at power on.
[0 to FFh/1]
4602 Scanner Memory Access
[0 to 0xFFF/0/1]
To Next Page
Loading...
