SP5000 Mode: SP5024 to SP5816
D131/D132/D133 3-98 SM Appendix
8th
If the time change is not a whole number (1.5 hours for
example), digit 8 should be 3 (30 minutes).
1 Setting
Enables/disables the settings for 002 and 003.
[0 to 1/1]
0: Disable, 1: Enable
3 Rule Set (Start) The start of summer time.
4 Rule Set (End) The end of summer time.
5401
Access Control DFU
This SP adjusts the settings below when installing and SDK application.
Note: "SDK" is the "Software Development Kit". This data can be converted
from SAS (VAS) when installed or uninstalled.
103 Default Document ACL
Used to assign the default access user access privileges to their own
documents on the document server.
104 Authentication Time
Standard setting "0" equals 60 sec.
[0 to 255/0/1 sec.]
162 Extend Certification Detail
Logout without an IC card.
[0 to 1/0/1]
0: Not allowed (default)
1: Allowed
200 SDK1 Unique ID
201 SDK1 Certification Method
210 SDK2 Unique ID
211 SDK2 Certification Method
220 SDK3 Unique ID
221 SDK3 Certification Method
To Next Page
Loading...
