SP5000 Mode: SP5024 to SP5816
D131/D132/D133 3-114 SM Appendix
5802
Printer Free Run
Make a base engine free run.
[0 to 1/0/1]
0: Release free run mode, 1:Enable free run mode
Return this setting to off (0) after testing is completed.
Finisher connectors should be disconnected and duplex mode should be off.
5803
Input Check p.3-283
5804
Output Check p.3-293
5807 Area Selection
[1 to 7/1/1 Step]
1:Japan 2:NA 3:EU 4:China 5:Taiwan 6:Asia 7:Korea
5810 Fusing SC Clear
When the machine detects a serious problem in the fusing unit, it will issue a
Level A (fatal error) SC code. The machine is disabled and the operator
cannot reset the SC until the machine has been released from the error with
this SC code. Touch [EXECUTE] to release the machine for servicing.
To Next Page
Loading...
