SP5000 Mode: SP5024 to SP5816
D131/D132/D133 3-116 SM Appendix
5816 Remote Service CTL
1
I/F Setting
Selects the remote service setting.
[0 to 2 / 2 / 1 /step]
0: Remote service off
1: CSS remote service on
2: @Remote service on
2
CE Call
Performs the CE Call at the start or end of the service.
[0 or 1 / 0 / 1 /step]
0: Start of the service
1: End of the service
Note: This SP is activated only when SP 5816-1 is set to "2".
3
Function Flag
Enables or disables the remote service function.
[0 to 1 / 0 / 1 /step]
0: Disabled, 1: Enabled
Note: This SP setting is changed to "1" after @Remote registor has been
completed.
4 Communication Test Call
This executes a test call from the machine to the service center after all the
@Remote settings have been completed.
5 Device Information Call
Passes all the information about internal settings of the machine to the
@Remote service center.
7
SSL Disable
Uses or does not use the RCG certification by SSL when calling the RCG.
[0 to 1 / 0 / 1 /step]
0: Uses the RCG certification
1: Does no use the RCG certification
To Next Page
Loading...
