Ricoh D131 - Page 717

SP5000 Mode: SP5821 to SP5990
D131/D132/D133 3-142 SM Appendix
5845
Delivery Server Setting CTL
Provides items for delivery server settings.
1
FTP Port No.
Sets the FTP port number used when image files to the Scan Router Server.
[0 to 65535 / 3670 / 1 /step]
2
IP Address (Primary)
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be referenced by the initial system setting.
Range: 000.000.000.000 to 255.255.255.255
6
Delivery Error Display Time
Use this setting to determine the length of time the prompt message is
displayed when a test error occurs during document transfer with the NetFile
application and an external device.
[0 to 999 / 300 / 1 second /step]
8
IP Address (Secondary)
Specifies the IP address assigned to the computer designated to function as
the secondary delivery server of Scan Router. This SP allows only the setting
of the IP address without reference to the DNS setting.
Range: 000.000.000.000 to 255.255.255.255
9
Delivery Server Model
Allows changing the model of the delivery server registered by the I/O device.
[0 to 4/ 0 / 1 /step]
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package