Ricoh D131 - Page 75

8 1/2"x14" Paper Size Tray Type 9002 (B474)
SM 2-31 D131/D132/D133
Installation
5. Remove the LCT cover [A] (
x 1).
6. Remove the right stay [B] at
and re-attach it below at ( x 2).
7. Remove the right cover [C] (
x 2).
8. Attach the front bracket [A] with the beveled corner down ( x 2).
 If the brackets are difficult to install, raise the bottom plate with your hand.
9. Attach the rear bracket [B] with the beveled corner down (
x 2).
10. Attach the bottom plate extension [C] with the hex nuts (
x 4).