SP8000 Data Log2
SM Appendix 3-225 D131/D132/D133
Service
Program
Mode Tables
8064
P:FIN Jobs
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for print jobs only. The finishing method is
specified by the application.
8065
S:FIN Jobs
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for scan jobs only. The finishing method is
specified by the application.
Note: Finishing features for scan jobs are not available at this time.
8066
L:FIN Jobs
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs output from within the document
server mode screen at the operation panel. The finishing method is specified
from the print window within document server mode.
8067
O:FIN Jobs
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs executed by an external application,
over the network. The finishing method is specified by the application.
1
Sort
Number of jobs started in Sort mode. When a stored
copy job is set for Sort and then stored on the
document server, the L: counter increments. (See
SP8066 1)
2
Stack Number of jobs started out of Sort mode.
3
Staple Number of jobs started in Staple mode.
4
Booklet
Number of jobs started in Booklet mode. If the machine
is in staple mode, the Staple counter also increments.
5
Z-Fold
Number of jobs started In any mode other than the
Booklet mode and set for folding (Z-fold).
6
Punch
Number of jobs started in Punch mode. When Punch is
set for a print job, the P: counter increments. (See
SP8064 6.)
To Next Page
Loading...
