Service
Program
Mode Tables
8075
S:Jobs/PGS
[0 to 9999999/ 0 / 1]
These SPs count and calculate the number of scan jobs by size based on the
number of pages in the job.
8076
L:Jobs/PGS
[0 to 9999999/ 0 / 1]
These SPs count and calculate the number of jobs printed from within the
document server mode window at the operation panel, by the number of pages
in the job.
8077
O:Jobs/PGS
[0 to 9999999/ 0 / 1]
These SPs count and calculate the number of "Other" application jobs (Web
Image Monitor, Palm 2, etc.) by size based on the number of pages in the job.
1 1 Page 8 21 to 50 Pages
2 2 Pages 9 51 to 100 Pages
3 3 Pages 10 101 to 300 Pages
4 4 Pages 11 301 to 500 Pages
5 5 Pages 12 501 to 700 Pages
6 6 to 10 Pages 13 701 to 1000 Pages
7 11 to 20 Pages 14 1001 to Pages
For example: When a copy job stored on the document server is printed in document server
mode, the appropriate L: counter (SP8076 0xx) increments.
Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
If a job is paused and re-started, it counts as one job.
If the finisher runs out of staples during a print and staple job, then the job is counted at the
time the error occurs.
For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying the
number of sets of copies by the number of pages scanned. (One duplex page counts as 2.)
The first test print and subsequent test prints to adjust settings are added to the number of
pages of the copy job (SP 8072).
To Next Page
Loading...
