Service
Program
Mode Tables
8221
ADF Org Feeds
[0 to 9999999/ 0 / 1]
These SPs count the number of pages fed through the ADF for front and
back side scanning.
1 Front
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count
is the same as the number of pages fed for either simplex or duplex
scanning.
With an ADF that cannot scan both sides simultaneously, the Front side
count is the same as the number of pages fed for duplex front side
scanning. (The front side is determined by which side the user loads face
up.)
2 Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the
same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is
the same as the number of pages fed for duplex rear-side scanning.
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
To Next Page
Loading...
