Printer SP Tables
D131/D132/D133 3-274 SM Appendix
1001 Bit Switch
2 Bit Switch 2 Settings 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 Applying a collation Type Shift
Collate
Normal
Collate
A collation type (shift or normal) will be applied to all jobs that do not
already have a "Collate Type" configured.
Note: If #5-0 is enabled, this Bit Switch has no effect.
bit 3 [PCL5e/c,PS]: PDL Auto Switching 0: Enable 1: Disable
Disable: The MFPs ability to change the PDL processor mid-job.
Some host systems submit jobs that contain both PS and PCL5e/c. If Auto
PDL switching is disabled, these jobs will not be printed properly.
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
1001 Bit Switch
3 Bit Switch 3 Settings 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 [PCL5e/c]: Legacy HP compatibility 0: Disable 1: Enable
Enable: Uses the same left margin as older HP models such as
HP4000/HP8000.
In other words, the left margin defined in the job (usually "<ESC>*r0A")
will be changed to "<ESC>*r1A"
To Next Page
Loading...
