Printer SP Tables
D131/D132/D133 3-276 SM Appendix
Enable: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5 Face-up output Disable Enable
Enable: All print jobs will be output face-up in the destination tray.
bit 6 Method for determining the image rotation
for the edge to bind on.
Disable
Enable
Enable: the image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed orientation
jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS: Pre-05S models
bit 7
Letterhead mode printing Disable
Enable
(Duplex)
Routes all pages through the duplex unit.
Disable: Simplex pages or the last page of an odd-paged duplex job, are
not routed through the duplex unit. This could result in problems with
letterhead/pre-printed pages.
Only affects pages specified as Letterhead paper.
To Next Page
Loading...
