Ricoh D147 - Page 1061

Main SP Tables-2-2
D146/D147/D148/D149/D150 2-342 System Maintenance Section
2717
[Thick4:TrailEdgeCorrection]
Sets output value [%] for paper transfer ampere trailing edge correction per
thickness / printing sides.
003 Paper Transfer:1side *ENG [0 to 995 / 100 / 5%/step]
004 Paper Transfer:2side *ENG [0 to 995 / 100 / 5%/step]
2718
[Thick4:SwitchTimingTrailEdge]
Sets switch timing for paper transfer ampere trailing edge correction per
thickness / printing sides.
003 Paper Transfer:1side *ENG [0 to 50 / 0 / 2mm/step]
004 Paper Transfer:2side *ENG [0 to 50 / 0 / 2mm/step]
2901
[OPC Drum Brake Time]
Sets braking time when stopping drum (FC) motor.
001 All *ENG [50 to 240000 / 50 / 10msec/step]
2902 [OPC Drum Reverse Time]
001
All: BW *ENG [0 to 200 / 50 / 10msec/step]
Sets reversing time when stopping drum (K) / image transfer motor.
002
All: FC *ENG [0 to 200 / 50 / 10msec/step]
Sets reversing time when stopping drum (FC) motor.
2903
[Image Transfer Brake Time]
Sets braking time when stopping drum (K) / image transfer motor.
003 All *ENG [50 to 240000 / 50 / 10msec/step]