Main SP Tables-3
D146/D147/D148/D149/D150 2-358 System Maintenance Section
3100 [Tonner End Detection: Set]
001
ON/OFF *ENG [0 or 1 / 0 / 1/step]
Whether to decide NE/TE.
0: Enable
1: Disable
002
NE Detection *ENG [0 or 1 / 0 / 1/step]
NE decision method.
0: Counter & Toner End Sensor
1: Toner End Sensor Only
3101
[Toner Status :Disp]
Displays remaining toner.
001 K ENG
[0 to 10 / 10 / 1/step]
10: Full
1: Near end
0: Toner end
002 C ENG
003 M ENG
004 Y ENG
3102
[Toner Remain:Disp]
Remaining toner calculated form motor running time.
001 Bottle Motor: Bk *ENG
[0.000 to 700.000 / 560.000 /
0.001g]
002 Bottle Motor: C *ENG
[0.000 to 700.000 / 440.000 /
0.001g]
003 Bottle Motor: M *ENG
004 Bottle Motor: Y *ENG
3102
[Toner Remain:Disp]
Remaining toner calculated from imaging size.
011 Pixel: Bk *ENG
[0.000 to 700.000 / 560.000 /
0.001g]