Input Check Table
D146/D147/D148/D149/D150 3-18 System Maintenance Section
6011
[1-Pass ADF INPUT Check]
For Single-Pass simultaneous duplex models only.
001
Original Length 1 (B5 Sensor) ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor
area.
002
Original Length 2 (A4 Sensor) ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor
area.
003
Original Length 3 (LG Sensor) ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor
area.
004
Original Width 1 ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor
area.
005
Original Width 2 ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor
area.
006
Original Width 3 ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor
area.
007
Original Width 4 ENG [0 or 1 / 0 / 1/step]
Gets sensor information from ADF. Gives 1 when there is a paper at sensor
area.
To Next Page
Loading...
