Ricoh D147 - Page 1565

Input Check Table
D146/D147/D148/D149/D150 3-26 System Maintenance Section
059
Paper Exit Open/Close Guide
Plate Limit SW
ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
060
Punch Selection DIPSW 1 ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
061
Punch Selection DIPSW 2 ENG [0 or 1 / 0 / 1/step]
Gets information of specified switch. Displays signal level of switch as it is.
6135
[INPUT Check: FrontFIN]
Gets information of specified sensor. Displays signal level of sensor as it is.
001 Entrance Sensor *ENG [0 or 1 / 0 / 1/step]
002 Carry Sensor *ENG [0 or 1 / 0 / 1/step]
003 Exit Sensor *ENG [0 or 1 / 0 / 1/step]
004 Staple Tray Paper Sensor *ENG [0 or 1 / 0 / 1/step]
005 Front Jogger HP Sensor *ENG [0 or 1 / 0 / 1/step]
006 Rear Jogger HP Sensor *ENG [0 or 1 / 0 / 1/step]
007 Sft Roller HP Sensor *ENG [0 or 1 / 0 / 1/step]
008 Hitroll HP Sensor *ENG [0 or 1 / 0 / 1/step]
009 Ext Guide Plate HP Sensor *ENG [0 or 1 / 0 / 1/step]
010 Staple Moving HP Sensor ENG [0 or 1 / 0 / 1/step]
011 Shift Tray Paper Sensor ENG [0 or 1 / 0 / 1/step]
012 Shift Tray Limit Sensor ENG [0 or 1 / 0 / 1/step]
013 Staple Rotation Sensor ENG [0 or 1 / 0 / 1/step]
014 Staple Near End Sensor ENG [0 or 1 / 0 / 1/step]
015 Self Priming Sensor ENG [0 or 1 / 0 / 1/step]
016 Stopper HP Sensor ENG [0 or 1 / 0 / 1/step]