Service Call 501-584
D146/D147/D148/D149/D150 5-56 SM
SC No. Level Error Name/Error Condition/Major Cause/Solution
§ Lift motor error/connector missing
§ Limit sensor error/connector missing
§ Harness broken
§ Bank control board defective
§ Paper set fault
§ Timing belt damage/dropout
§ Timing pulley damage/dropout
§ Base plate damage/horizontality fault
§ Paper feed roller missing item
§ Pickup arm defective
§ Foreign matter, such as paper scrap, is caught inside the
tray
§ Reset the paper
§ Remove the foreign matter
§ Replace the motor
§ Reset the connector
§ Replace the harness
§ Replace the sensor
§ Replace the control board for the optional side LCT
§ Replace the tray
§ Replace the paper feed roller
§ Replace the pick-up arm
§ Replace the timing belt
§ Replace the timing pulley
§ Replace the base plate
To Next Page
Loading...
