Ricoh D147 - Page 801

Main SP Tables-1
D146/D147/D148/D149/D150 2-82 System Maintenance Section
1142 [Fusing Jam Detection]
001
SC Display *ENG
[0 or 1 / 0 / 1/step]
0: OFF
1: ON
Display SC or not when detecting a fusing jam 3 times in a roll.
1151 [Pressure Setting]
001
Pressure Change ON/OFF *ENG
[0 or 1 / 1 / 1/step]
0: OFF
1: ON
Do not change. Switch welding pressure.
002
Pressure Time1 *ENG [0 to 10000 / 70 / 10msec/step]
Do not change. Rotate time form pressure filler edge to pressure 1
003
Pressure Time2 *ENG [0 to 10000 / 70 / 10msec/step]
Do not change. Rotate time form pressure filler edge to pressure 2
005
Depressure Time *ENG [0 to 10000 / 0 / 10msec/step]
Do not change. Rotate time form depressure filler edge to depressure position
010
Shift Time:Energy Saving *ENG [0 to 3600 / 0 / 1sec/step]
Do not change. Printer: Change depressure timing when standing by after
paper trough of image process temperature correction level 2.
011
Shift Time *ENG [0 to 3600 / 60 / 1sec/step]
Do not change. Change depressure timing when standby.
051
Rotary speed *ENG [-12.8 to 12.7 / 0 / 0.1%/step]
Do not change. Adjusts rotate speed of fusing depressure drive. Rotate
speed[pps]= basis rotate speed[pps]+basis rotate speed[pps] x SP set value
[%}
1151 [Pressure Setting]
101 Pressure:Plain1/2 *ENG [0 to 3 / 2 / 1/step]