Ricoh D147 - Page 820

Main SP Tables-1
System Maintenance Section 2-101 D146/D147/D148/D149/D150
SP Mode Tables
210
Shading Position Temp:
DLEnv: Clear
ENG [0 to 250 / 0 / 1deg/step]
Do not change. Temperature threshold to return DLEnv position to HP
211
Shading Position Temp:
COM10: Clear
ENG [0 to 250 / 0 / 1deg/step]
Do not change. Temperature threshold to return com10 position to HP
212
Shading Position Temp:
Postcard: Clear
ENG [0 to 250 / 0 / 1deg/step]
Do not change. Temperature threshold to return post card position to HP
213
Shading Position Temp:
SRA3: Clear
ENG [0 to 250 / 0 / 1deg/step]
Do not change. Temperature threshold to return SRA3 position to HP
1163 [Shading Plate Control]
001
Shading Position Time:
12inch: 1
ENG
[0 to 10000 / D146:14, D147:14,
D148:8, D149:8, D150:8 /
1sec/step]
Do not change. No 1 position (small shade) Transitions time of 12inch
002
Shading Position Time:
12inch: 2
ENG
[0 to 10000 / D146:27, D147:27,
D148:33, D149:33, D150:33 /
1sec/step]
Do not change. No 2 position (middle shade) Transitions time of 12inch
003
Shading Position Time:
12inch: 3
ENG
[0 to 10000 / D146:53, D147:53,
D148:60, D149:60, D150:60 /
1sec/step]
Do not change. No 3 position (large shade) Transitions time of 12inch
004
Shading Position Time: A3: 1 ENG [0 to 10000 / 10000 / 1sec/step]
Do not change. No 1 position (small shade) Transitions time of A3
005 Shading Position Time: A3: 2 ENG [0 to 10000 / 10000 / 1sec/step]