Ricoh D147 - Page 859

Main SP Tables-1
D146/D147/D148/D149/D150 2-140 System Maintenance Section
1902 [BIT1 Control]
004
Execute ENG [0 or 1 / 0 / 1/step]
Execution SP of BIT1 control
005
Result ENG [0 to 3 / 0 / 1/step]
Displays execution result of BIT1 control
008
Sensing position *ENG [0 to 3 / 1 / 1/step]
Scanning position of BIT1 control pattern
1903 [Amplitude Setting]
001
Threshold Trsns Bkdrum *ENG [0.0 to 300.0 / 5.0 / 0.1um/step]
Execution threshold of BIT1 control
002
Threshold FC Drum *ENG [0.0 to 300.0 / 5.0 / 0.1um/step]
Execution threshold of BIT1 control
003
Trsns Bkdrum *ENG [0.0 to 300.0 / 0.0 / 0.1um/step]
Displays amplitude value of BIT1 control
004
FC Drum *ENG [0.0 to 300.0 / 0.0 / 0.1um/step]
Displays amplitude value of BIT1 control
005
Cy *ENG [0.0 to 300.0 / 0.0 / 0.1um/step]
Displays amplitude value of BIT1 control check
006
Ma *ENG [0.0 to 300.0 / 0.0 / 0.1um/step]
Displays amplitude value of BIT1 control check
007
Ye *ENG [0.0 to 100.0 / 0 / 0.1um/step]
Displays amplitude value of BIT1 control check
008
Bk Offset Amp *ENG [-300.0 to 300.0 / 0.0 / 0.1um/step]
Off set amplitude of BIT1 control