Ricoh D147 - Page 890

Main SP Tables-2-1
System Maintenance Section 2-171 D146/D147/D148/D149/D150
SP Mode Tables
047
Ye: 1
st
-3
rd
*ENG
[0.00 to 100.00 / 24.29 /
0.01dot/step]
Adjusts main scan beam pitch against Y color LD1
Only for factory adjust.
048
Ye: 1
st
-4
th
*ENG
[0.00 to 100.00 / 36.44 /
0.01dot/step]
Adjusts main scan beam pitch against Y color LD1
Only for factory adjust.
2103 [Erase Margin Adjustment]
001
Lead Edge Width *ENG [0.0 to 9.9 / 4.2 / 0.1mm/step]
Adjusts trimming for sub scan lead edge.
§ Value increase: Trim wider.
§ Value decrease: Trim narrower.
002
Trail. Edge Width *ENG [0.0 to 9.9 / 4.2 / 0.1mm/step]
Adjusts trimming for sub scan trailing edge.
§ Value increase: Trim wider.
§ Value decrease: Trim narrower.
When printing, follow margin set with application.
003
Left *ENG [0.0 to 9.0 / 2.0 / 0.1mm/step]
Adjusts trimming for sub scan left edge.
§ Value increase: Trim wider.
§ Value decrease: Trim narrower.
When printing, follow margin set with application.
004
Right *ENG [0.0 to 9.0 / 2.0 / 0.1mm/step]
Adjusts trimming for sub scan right edge.
§ Value increase: Trim wider.
§ Value decrease: Trim narrower.
When printing, follow margin set with application.