Ricoh D147 - Page 892

Main SP Tables-2-1
System Maintenance Section 2-173 D146/D147/D148/D149/D150
SP Mode Tables
2107 [Image Parameter]
001
Image Gamma Flag ENG [0 or 1 / 1 / 1/step]
Turns writing Gamma property ON/OFF. For Design evaluation.
002
Shading Correction Flag *ENG [0 or 1 / 0 / 1/step]
Turns shading area correction ON/OFF. For Design evaluation.
2109 [Test Pattern]
003
Pattern Selection ENG [0 to 23 / 0 / 1/step]
Select patterns.
0 None 12 Independent Pattern (2dot)
1 Vertical Line (1dot) 13 Independent Pattern (4dot)
2 Vertical Line (2dot) 14 Trimming Area
3 Horizontal Line (1dot) 15 Hound's Tooth Check (Vertical)
4 Horizontal Line (2dot) 16 Hound's Tooth Check (Horizontal)
5 Grid Vertical Line 17 Band (Horizontal)
6 Grid Horizontal Line 18 Band (Vertical)
7 Grid Pattern Small 19 Checker Flag Pattern
8 Grid Pattern Large 20 Grayscale (Vertical Margin)
9 Argyle Pattern Small 21 Grayscale (Horizontal Margin)
10 Argyle Pattern Large 22 Two Beam Density Pattern
11 Independent Pattern (1dot) 23 Full Dot Pattern
005
Color Selection ENG
[1 to 4 / 1 / 1/step]
1: All Color
2: Ma
3: Ye
4: Cy
Selects output color for writing test pattern.