Ricoh D147 - Page 894

Main SP Tables-2-1
System Maintenance Section 2-175 D146/D147/D148/D149/D150
SP Mode Tables
004
Error Ye *ENG
[0x0000 to 0xFFFF / 0x0000 /
1/step]
LD Driver error flag Ye color (For abxyz/model D148/D149/D150)
005
Writing Unit Adj. Transfer ENG [0 or 1 / 0 / 1/step]
Execution flag to download adjustment values of writing unit to main units SP.
Executes when replacing the writing unit or assembling main unit
2111
[Forced Line Position Adj.]
Executes force correction of color match.
001
Mode a ENG [0 or 1 / 0 / 1/step]
Executes MUSIC mode a ( fine-tune x 2)
002
Mode b ENG [0 or 1 / 0 / 1/step]
Executes MUSIC mode b ( fine-tune x 1)
003
Mode c ENG [0 or 1 / 0 / 1/step]
Executes MUSIC mode c (rough-tune x 1)
004
Mode d ENG [0 or 1 / 0 / 1/step]
Executes MUSIC mode d (rough-tune then fine-tune)
2112 [TM/ID Sensor Check]
001
Execute ENG [0 or 1 / 0 / 1/step]
Executes test mode for Image transfer belt / TMP sensor.
010
General:FCR *ENG [0 to 999 / 0 / 1/step]
Shows test results for Image transfer belt / TMP sensor test mode, with 3bits / in
the order of [Front][Center][Rear].
020 Threshold Setting *ENG [0.00 to 3.50 / 1.90 / 0.01V/step]