Main SP Tables-2-1
System Maintenance Section 2-185 D146/D147/D148/D149/D150
2150
[Area Mag. Correction]
Corrects main scan color scale error, deflection.
Adjusts start writing position (Register) with sub dot level.
§ Value increase: image stretches topically.
§ Value decrease: image shrinks topically.
CMY color can be matched to adjusted BK color position by Using MUSIC after
operating this SP.
184 Area 1: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
185 Area 2: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
186 Area 3: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
187 Area 4: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
188 Area 5: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
189 Area 6: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
190 Area 7: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
191 Area 8: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
192 Area 9: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
193 Area 10: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
194 Area 11: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
195 Area 12: Ye *ENG [-16.00 to 16.00 / 0 / 0.01dot/step]
2152
[Shad. Correct Setting]
Changes exposure light amount.
§ Value increase: Light amount increases, and image density gets deeper.
§ Value decrease: Light amount decreases, and image density gets thinner.
Except, if Process control is executed, light amount / density will change.
001 Standard Speed: Bk *ENG [50 to 120 / 100 / 1%/step]
002 Standard Speed: Ma *ENG [50 to 120 / 100 / 1%/step]
003 Standard Speed: Cy *ENG [50 to 120 / 100 / 1%/step]
To Next Page
Loading...
