Ricoh D147 - Page 906

Main SP Tables-2-1
System Maintenance Section 2-187 D146/D147/D148/D149/D150
SP Mode Tables
015 Front End Area: Cy: LD4 *ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
017 Front End Area: Ye: LD1 *ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
018 Front End Area: Ye: LD2 *ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
019 Front End Area: Ye: LD3 *ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
020 Front End Area: Ye: LD4 *ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
2160
[Vertical Line Width]
Adjusts vertical line width
§ Value increase: vertical line gets wider.
§ Value decrease: vertical line gets thinner
Beware for side effects to image.
001 600dpi: Bk *ENG [10 to 15 / 15 / 1/step]
002 600dpi: Ma *ENG [10 to 15 / 15 / 1/step]
003 600dpi: Cy *ENG [10 to 15 / 15 / 1/step]
004 600dpi: Ye *ENG [10 to 15 / 15 / 1/step]
005 1200dpi: Bk *ENG [10 to 15 / 15 / 1/step]
006 1200dpi: Ma *ENG [10 to 15 / 15 / 1/step]
007 1200dpi: Cy *ENG [10 to 15 / 15 / 1/step]
008 1200dpi: Ye *ENG [10 to 15 / 15 / 1/step]
2160 [Vertical Line Width]
009
600dpi:Indet.:Bk *ENG [10 to 15 / 14 / 1/step]
Vertical line width correction: isolated dot.
010
1200dpi:Indet.:Bk *ENG [10 to 15 / 15 / 1/step]
Adjusts density for isolated dot.
§ Value increases: Deeper
§ Value decreases: Thinner
Beware for side effects to image.