Main SP Tables-2-1
System Maintenance Section 2-193 D146/D147/D148/D149/D150
2182 [Line Position Adj. Offset]
040
M. Scan: Dot: K *ENG [-512 to 511 / 0 / 1dot/step]
For setting main scan position of BK: MUSIC.
No need to operate.
2187
[Method Select]
MUSIC pattern setting. No need to operate.
002 MUSIC Pattern Length Adj. *ENG [-300 to 300 / 0 / 1dot/step]
003 Pattern Width Adj. *ENG [-512 to 511 / 0 / 1dot/step]
004 Pattern Interval Adj. *ENG [-512 to 511 / 0 / 1dot/step]
2190
[Line Position Adj.]
Sets belt scratch misdetection avoiding level for color shift detection.
No need to operate.
012 SnSErr Range *ENG [0 to 3500 / 200 / 1um/step]
2193 [MUSIC Condition Set]
002
Page: Job End: BW+FC *ENG [0 to 999 / 500 / 1page/step]
Condition threshold to auto execute MUSIC or not based on last printed sheets
from MUSIC when finish printing in B&W+Color mode.
003
Page: Job End: FC *ENG [0 to 999 / 200 / 1page/step]
Condition threshold to auto execute MUSIC or not based on last printed sheets
from MUSIC when finish printing in Color mode.
004
Page: Interrupt: BW+FC *ENG [0 to 999 / 200 / 1page/step]
Condition threshold to auto execute MUSIC or not based on last printed sheets
from MUSIC during printing in B&W+Color mode.
To Next Page
Loading...
