Ricoh D147 - Page 918

Main SP Tables-2-1
System Maintenance Section 2-199 D146/D147/D148/D149/D150
SP Mode Tables
007
Middle Speed M *ENG [0 to 800 / 550 / 1-V/step]
Refers to develop bias set to this SP when electric potential control with
Process control is not set.
008
Middle Speed Y *ENG [0 to 800 / 550 / 1-V/step]
Refers to develop bias set to this SP when electric potential control with
Process control is not set.
009
Low Speed: Bk *ENG [0 to 800 / 550 / 1-V/step]
Refers to develop bias set to this SP when electric potential control with
Process control is not set.
010
Low Speed: C *ENG [0 to 800 / 550 / 1-V/step]
Refers to develop bias set to this SP when electric potential control with
Process control is not set. (Low speed: C)
011
Low Speed: M *ENG [0 to 800 / 550 / 1-V/step]
Refers to develop bias set to this SP when electric potential control with
Process control is not set. (Low speed: M)
012
Low Speed: Y *ENG [0 to 800 / 550 / 1-V/step]
Refers to develop bias set to this SP when electric potential control with
Process control is not set. (Low speed: Y)
2230 [QL Power Setting]
001
Standard Speed *ENG [0 to 0 / 0 / 1%/step]
Decides light amount to remove electricity at Std. speed.
002
Middle Speed *ENG [0 to 0 / 0 / 1%/step]
Decides light amount to remove electricity at Mid. Speed.
003
Low Speed *ENG [0 to 0 / 0 / 1%/step]
Decides light amount to remove electricity at Low. Speed.