Ricoh D147 - Page 922

Main SP Tables-2-1
System Maintenance Section 2-203 D146/D147/D148/D149/D150
SP Mode Tables
002 Threshold 2 *ENG [0 to 350 / 257 / 1mm/step]
003 Threshold 3 *ENG [0 to 350 / 210 / 1mm/step]
004 Threshold 4 *ENG [0 to 350 / 148 / 1mm/step]
2308
[Paper Size Correction]
Sets paper width threshold for paper size correction (when using optional
roller.).
005 Threshold 1 *ENG [0 to 350 / 297 / 1mm/step]
006 Threshold 2 *ENG [0 to 350 / 257 / 1mm/step]
007 Threshold 3 *ENG [0 to 350 / 210 / 1mm/step]
008 Threshold 4 *ENG [0 to 350 / 148 / 1mm/step]
2311
[Non Image Area:Bias]
Sets bias for non image area.
001 Image Transfer *ENG [10 to 250 / 100 / 5%/step]
002
Paper Transfer *ENG [0 to 230 / 0 / 1-uA/step]
* When between papers are close.
003 Paper Transfer *ENG [0 to 2100 / 500 / 10V/step]
2316
[Power ON:Bias]
Sets bias for non image area.
001 Image Transfer *ENG [0 to 80 / 5 / 1uA/step]
2326
[Transfer Roller CL:Bias]
Sets CL bias for corresponding operation.
001 Positive:befor and after JOB *ENG [0 to 2100 / 250 / 10V/step]
002 Negative:befor and after JOB *ENG [10 to 995 / 100 / 10%/step]