Ricoh D147 - Page 923

Main SP Tables-2-1
D146/D147/D148/D149/D150 2-204 System Maintenance Section
003
Positive:befor and
afterProcon
*ENG [0 to 2100 / 2000 / 10V/step]
004
Negative:befor and
afterProcon
*ENG [10 to 995 / 100 / 10%/step]
005 Positive:prevention *ENG [0 to 2100 / 500 / 10V/step]
2351
[Common:BW:Bias]
Sets image transfer output value per line speed in BW mode.
001 Image Transfer:standard *ENG
[0 to 80 / D146: 33, D147: 33,
D148: 41, D149: 57, D150: 57 /
1uA/step]
002 Image Transfer:Middle *ENG [0 to 80 / 24 / 1uA/step]
003 Image Transfer:low *ENG [0 to 80 / 16 / 1uA/step]
2357
[Common:FC:Bias]
Sets image transfer output value per line speed in FC mode.
001 ImageTransfer:standard:Bk *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / D146: 33,
D147: 33, D148: 41, D149: 57,
D150: 57 / 1uA/step]
002 ImageTransfer:standard:C *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / D146: 33,
D147: 33, D148: 41, D149: 57,
D150: 57 / 1uA/step]
003 ImageTransfer:standard:M *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / D146: 35,
D147: 35, D148: 45, D149: 62,
D150: 62 / 1uA/step]
004 ImageTransfer:standard:Y *ENG
[0 to (D146: 60, D147: 60, D148:
80, D149: 80, D150: 80) / D146: 38,
D147: 38, D148: 49, D149: 67,
D150: 67 / 1uA/step]