MagneMover LITE User Manual 21
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Changes
Overview
This manual is changed as required to keep it accurate and up-to-date to provide the most
complete documentation possible for the MagneMover
®
LITE transport system. This section
provides a brief description of each significant change.
NOTE: Distribution of this manual and all addenda and attachments is not controlled. To
identify the current revision, see the Literature Library on the Rockwell Automation
website.
Rev. A
Initial release.
Rev. B
Added the following:
• Added this Changes section.
•In Chapter 2, Safety Guidelines, added regulatory information and updated all figures
to show current labeling. Added a figure that shows hazardous points on the MM
LITE
™
transport system.
• Added Chapter 3, Design Guidelines, moved the system layout guidelines to it and
added power wiring. Added guidelines for motor mounting on custom motor mounts
and added puck loading information.
•In Chapter 4, Specifications and Site Requirements, added mechanical drawings for
the switches, motor bracket, tandem puck, node controllers, and power supply. Added
electrical connection and indicator information for the node controllers and power
supply. Added power and communication cable information.
•In Chapter 5, Installation, added procedures for securing the system to the floor with a
bracket and for mounting the system electronics on the frame. Added digital I/O con-
nection information and Power over Ethernet connection information and cautions.
Provided additional information on network and external communication connections
including PoE.