Maintenance
Repair
392 MagneMotion
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
10. Store the motor in a secure location.
11. See Shipping on page 458 to return the motor to MagneMotion.
Install the New Motor
1. See Motor Installation on page 254 for detailed installation instructions.
2. Reference the labels that were previously placed on the cables and reconnect the
cables to the motor.
3. Restore power to the section of the MM LITE transport system where the motor was
replaced.
4. Revise the MICS file and upload it to all node controllers.
5. Program the new motor with the current Motor ERF Image files (see Program Ether-
net Motors on page 393).
6. Resume motion on the section of the MM LITE transport system where the motor was
replaced.