Specifications and Site Requirements
Electrical Specifications
MagneMover LITE User Manual 215
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Figure 4-59: MagneMover LITE Ethernet Switch Electrical Connections
NOTE: The connector locations vary on the different versions of the switch. However, all
connectors shown are on all switches.
Table 4-22: MagneMover LITE Ethernet Switch Electrical Connections
Label Description Connector Type
DIAG Diagnostics – Factory Use Only M8 Nano-Mizer, 4-Pin, Plug
ETH1 Ethernet Communication
(10/100/1000 Base-Tx)
M12 Eurofast, FKFDD, Socket
ETH2 Ethernet Communication
(10/100/1000 Base-Tx)
M12 Eurofast, FKFDD, Socket
P1 +36V DC ±10%, 1.5 A typical, 5.0 A max Mini-Conn-X, 4-Pin, Plug
Table 4-23: MagneMover LITE Switch Power Pinouts
Mini-Conn-X, 4-Pin, Plug
V+ Propulsion 1
V+ Logic 2
V- Return 3
RTN 4
Power
Bottom View (Left Switch Shown)
Connector
Ethernet
Connector
Ethernet
Connector
To Next Page
Loading...
