Maintenance
Repair
MagneMover LITE User Manual 421
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
5. Lift the linkage plate off the pucks.
Figure 7-28: Remove Tandem Wheeled Puck Linkage Plate Assembly
6. With both pucks in the fixture, hold the left puck in place and lift the right puck out of
the fixture and away from the left puck.
PINCH/CRUSH HAZARD: Strong magnets in use.
To avoid injury from strong magnetic attractive
forces:
• Handle only one vehicle (puck) or magnet array at
a time.
• Do not place any body parts (for example, fingers)
between a magnet array and any ferrous material
or another magnet array.
• Vehicles (pucks) and magnet arrays not being used
must be secured individually in isolated packag-
ing.
Linkage Plate
Installation
Fixture
Wheeled Puck
Wheeled Puck
M6 Shoulder Screw
(2X)
Thrust Washer
Thrust Washer
Flange Bearing
Elastomer Washer
(2X)
(2X)
(2X)
(2X)
To Next Page
Loading...
