Maintenance
Shipping
MagneMover LITE User Manual 459
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Packing Procedure
When any of the MagneMover LITE components are shipped, either for return to MagneMo-
tion for service or to another location, they must be properly packaged to make sure that they
arrive undamaged. The following procedure provides the correct method of handling and
packaging the MagneMover LITE components for shipment.
NOTE: Material being shipped must be properly packaged to make sure that it arrives
undamaged. It is recommended that products be shipped in their original packaging
to help prevent damage.
MAGNETIC FIELD HAZARD: Strong magnets in use.
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
array on the vehicles (pucks).
PINCH/CRUSH HAZARD: Strong magnets in use.
To avoid injury from strong magnetic attractive forces:
• Handle only one vehicle (puck) or magnet array at a time.
• Do not place any body parts (for example, fingers)
between a magnet array and any ferrous material or
another magnet array.
• Vehicles (pucks) and magnet arrays not being used must
be secured individually in isolated packaging.
NOTICE Strong magnets in use.
To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (for example, memory disks/chips, credit cards, and
tapes) and electronics away from the magnet arrays.
To Next Page
Loading...
Need help?
General
