Installation
Unpacking and Inspection
MagneMover LITE User Manual 239
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
Unpacking and Moving
Required Tools and Equipment
• Open-end Wrench, Adjustable.
• Metric Hex wrenches.
Unpacking and Moving Instructions
The MagneMover LITE transport system arrives from the factory as a set of preassembled
components or as a set of individual components ready for final installation. The information
required to install these components is provided in Transport System Installation on page 241.
MAGNETIC FIELD HAZARD: Strong magnets in use.
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
array on the vehicles (pucks).
PINCH/CRUSH HAZARD: Strong magnets in use.
To avoid injury from strong magnetic attractive forces:
• Handle only one vehicle (puck) or magnet array at a time.
• Do not place any body parts (for example, fingers)
between a magnet array and any ferrous material or
another magnet array.
• Vehicles (pucks) and magnet arrays not being used must
be secured individually in isolated packaging.
NOTICE Strong magnets in use.
To avoid damage to watches, instruments, electronics, and
magnetic media, keep metal tools, metal objects, magnetic
media (for example, memory disks/chips, credit cards, and
tapes) and electronics away from the magnet arrays.
To Next Page
Loading...
