Installation
Unpacking and Inspection
240 MagneMotion
Rockwell Automation Publication MMI-UM002F-EN-P - October 2022
1. Upon receiving the packages, visually verify that the packaging is not damaged.
Inform the freight carrier and MagneMotion of any inspection discrepancy.
2. Open each shipping package and verify the contents against the shipping documents.
3. Carefully inspect the MagneMover LITE components and all additional items for
signs of shipping damage.
4. Move all items to their destination (see Transport System Installation on page 241).
LIFTING HAZARD
The MagneMover LITE components can weigh as much as
7.3 kg [16.1 lb].
Use proper techniques for lifting and safety toe shoes when
moving any MagneMover LITE components.
To Next Page
Loading...
Need help?
General
