Rohde & Schwarz RTB2004 - Flankentrigger

Fernsteuerbefehle
R&S
®
RTB2000
293Bedienhandbuch 1333.1611.03 ─ 05
Parameter:
<Type> EDGE | WIDTh | TV | BUS | LOGic | LINE
EDGE
Edge trigger
WIDTh
Width trigger
TV
Video trigger
BUS
Requires at least one protocol option for serial bus (R&S RTB-
K1 to K3)
LOGic
Pattern trigger, logic trigger
LINE
Trigger on power supply line
TRIGger:A:HOLDoff:MODE <HoldOffMode>
Enables or disables the holdoff time.
Parameter:
<HoldOffMode> TIME | OFF
*RST: Off
TRIGger:A:HOLDoff:TIME <HoldOffTime>
Defines the holdoff time. The next trigger occurs only after the holdoff time has passed.
Parameter:
<HoldOffTime> Std.-einheit: s
15.5.2 Flankentrigger
TRIGger:A:EDGE:SLOPe............................................................................................... 293
TRIGger:A:LEVel<n>[:VALue]..........................................................................................294
TRIGger:A:FINDlevel......................................................................................................294
TRIGger:A:EDGE:COUPling........................................................................................... 294
TRIGger:A:HYSTeresis...................................................................................................295
TRIGger:A:LEVel<n>:HYSTeresis....................................................................................295
TRIGger:A:EDGE:FILTer:HFReject.................................................................................. 295
TRIGger:A:EDGE:FILTer:NREJect................................................................................... 295
TRIGger:A:EDGE:SLOPe <Slope>
Sets the slope for the edge trigger.
Trigger