Rohde & Schwarz RTB2004 - Messungen; Schnellmessungen

Fernsteuerbefehle
R&S
®
RTB2000
333Bedienhandbuch 1333.1611.03 ─ 05
Beispiel:
EXPort:ATABle:SAVE
The file contains the following timestamp values:
"","Date","Time"
"Start of Acquisition","2014-11-24","14:35:59"
"Last Acquisition","2014-11-24","14:36:01"
"Acquisitions","150"
"Number","Relative Time","Time to previous",
"Date","Time", "Trigger"
"0","-0.000000000000000E+00","1.009638400000000E-02",
"2014-11-24","14:36:01","0.0000000000E+00",Trg'd
"-1","-1.009638400000000E-02","2.000568800000000E-02",
"2014-11-24","14:36:00","9.8990361600E-01",Trg'd
"-2","-3.010207200000000E-02","2.000216800000000E-02",
"2014-11-24","14:36:00","9.6989792800E-01",Trg'd
"-3","-5.010424000000000E-02","2.001423200000000E-02",
"2014-11-24","14:36:00","9.4989576000E-01",Trg'd
"-4","-7.011847200000000E-02","2.000044000000000E-02",
"2014-11-24","14:36:00","9.2988152800E-01",Trg'd
"-5","-9.011891200000001E-02","9.917412000000000E-03",
"2014-11-24","14:36:00","9.0988108800E-01",Trg'd
"-6","-1.000363240000000E-01","1.009686000000000E-02",
"2014-11-24","14:36:00","8.9996367600E-01",Trg'd.....
Verwendung:
Ereignis
15.7 Messungen
15.7.1 Schnellmessungen
In den Befehlen für Schnellmessungen ist das numerische Suffix <m> irrelevant und
sollte weggelassen werden.
MEASurement<m>:AON.................................................................................................333
MEASurement<m>:AOFF............................................................................................... 334
MEASurement<m>:ARESult?..........................................................................................334
MEASurement<m>:ALL[:STATe]...................................................................................... 334
MEASurement<m>:AON
Starts the quick measurement.
Verwendung:
Ereignis
Messungen