Fernsteuerbefehle
R&S
®
RTB2000
351Bedienhandbuch 1333.1611.03 ─ 05
Suffix: 
<m>
.
1, the suffix is irrelevant.
Rückgabewerte: 
<Value> Measurement result
Verwendung:  Nur Abfrage
CURSor<m>:XDELta[:VALue]?
Returns the time difference between two vertical cursor lines (Δt).
Suffix: 
<m>
.
1, the suffix is irrelevant.
Rückgabewerte: 
<Delta> Bereich:  -100E24  bis  100E24
Inkrement:  0.1
Std.-einheit: s
Verwendung:  Nur Abfrage
CURSor<m>:XDELta:INVerse?
Returns the inverse time difference between the two cursors (1/Δt, frequency).
Suffix: 
<m>
.
1, the suffix is irrelevant.
Rückgabewerte: 
<DeltaInverse> Bereich:  -100E24  bis  100E24
Inkrement:  0.1
Std.-einheit: 1/s
Verwendung:  Nur Abfrage
CURSor<m>:YDELta[:VALue]?
Queries the delta of the values in y-direction at the two cursor lines.
Suffix: 
<m>
.
1, the suffix is irrelevant.
Rückgabewerte: 
<YDelta> Delta value
Verwendung:  Nur Abfrage
CURSor<m>:YDELta:SLOPe?
Returns the inverse value of the vertical difference (e.g. voltage difference) - the reci-
procal of the vertical distance of two horizontal cursor lines: 1/
Δ
V.
Messungen