Rohde & Schwarz RTB2004 - Page 367

Fernsteuerbefehle
R&S
®
RTB2000
367Bedienhandbuch 1333.1611.03 ─ 05
Parameter:
<ReferenceMode> OFF | INDicated | RANGe
The reference marker is set to the peak with a specified index
number.
RANGe
The peak with the highest level within the selected range is set
as the reference marker.
SPECtrum:MARKer:REFerence:SETup:INDex
Sets the reference marker to the peak with the specified index, if SPECtrum:MARKer:
REFerence:SETup:MODE is set to INDicated.
Parameter:
<ReferenceIndex>
SPECtrum:MARKer:REFerence:SETup:FREQuency
Sets the center frequency for the capture range, if SPECtrum:MARKer:REFerence:
SETup:MODE is set to RANGe.
Parameter:
<ReferenceFrequency>
SPECtrum:MARKer:REFerence:SETup:SPAN
Sets the span range, the ratio of the capture range and the width of the specified refe-
rence mode, if SPECtrum:MARKer:REFerence:SETup:MODE is set to RANGe.
Parameter:
<ReferenceSpan>
SPECtrum:MARKer:RMARker?
Returns the frequency and the level values of the present reference marker.
Rückgabewerte:
<ReferenceFrequency>
<ReferenceLevel>
Verwendung: Nur Abfrage
SPECtrum:MARKer:RMARker:FREQuency?
Returns the frequency of the reference marker.
Rückgabewerte:
<ReferenceFrequency>
Verwendung: Nur Abfrage
Anwendungen