Rohde & Schwarz RTB2004 - Page 403

Fernsteuerbefehle
R&S
®
RTB2000
403Bedienhandbuch 1333.1611.03 ─ 05
SYSTem:TIME <Hour>,<Minute>,<Second>
Specifies the internal time for the instrument.
Parameter:
<Hour> Bereich: 0 bis 23
Inkrement: 1
Std.-einheit: h
<Minute> Bereich: 0 bis 59
Inkrement: 1
Std.-einheit: min
<Second> Bereich: 0 bis 59
Inkrement: 1
Std.-einheit: s
Verwendung: SCPI-konform
SYSTem:COMMunicate:INTerface[:SELect]
Selects the interface for remote control and web browser access ( ETHernet only).
Parameter:
<Interface> USB | ETHernet
SYSTem:BEEPer:CONTrol:STATe
Enables or disables a sound for general control events, e.g. changing the measure-
ment type in the „Measure“ menu.
Parameter:
<ControlBeep> ON | OFF
SYSTem:BEEPer:ERRor:STATe
Enables or disables the beep if an error occurs.
Parameter:
<ErrorBeep> ON | OFF
SYSTem:BEEPer:TRIG:STATe
Enables or disables the beep if a trigger occurs.
Parameter:
<TriggerBeep> ON | OFF
SYSTem:BEEPer[:IMMediate]
Generates an immediate beep. You can use this command, for example, to locate the
instrument.
Allgemeine Geräteeinstellungen