Rohde & Schwarz RTB2004 - Page 440

Fernsteuerbefehle
R&S
®
RTB2000
440Bedienhandbuch 1333.1611.03 ─ 05
Suffix:
<b>
.
1 | 2
Rückgabewerte:
<FrameCount> Total number of decoded frames.
Verwendung: Nur Abfrage
BUS<b>:UART:FRAMe<n>:STARt?
BUS<b>:UART:RX:FRAMe<n>:STARt?
BUS<b>:UART:TX:FRAMe<n>:STARt?
Return the start time of the specified frame.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
Rückgabewerte:
<TxFrameStart> Time in s, range depends on sample rate, record length, and
time base
Verwendung: Nur Abfrage
BUS<b>:UART:FRAMe<n>:STOP?
BUS<b>:UART:RX:FRAMe<n>:STOP?
BUS<b>:UART:TX:FRAMe<n>:STOP?
Return the end time of the specified frame.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
Rückgabewerte:
<TxFrameStop> Time in s, range depends on sample rate, record length, and
time base
Verwendung: Nur Abfrage
BUS<b>:UART:FRAMe<n>:STATe?
BUS<b>:UART:RX:FRAMe<n>:STATe?
BUS<b>:UART:TX:FRAMe<n>:STATe?
Returns the status of the specified frame.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
Analyse serieller Busse