Fernsteuerbefehle
R&S
®
RTB2000
487Bedienhandbuch 1333.1611.03 ─ 05
Parameter:
<ModulationType> AM | FM | ASK | FSK
AM
Amplitude modulation. The amplitude of the carrier signal is
varied according to the modulation signal.
FM
Frequency modulation. The frequency of the carrier signal is
varied according to the modulation signal.
ASK
Amplitude shift keying (ASK) modulation. The amplitude swit-
ches between 100% and the WGENerator:MODulation:ASK:
DEPTh amplitude with a defined modulating WGENerator:
MODulation:ASK:FREQuency.
FSK
Frequency shift keying (FSK) modulation. The signal frequency
switches between the carrier frequency and the WGENerator:
MODulation:FSK:HFREquency at a WGENerator:
MODulation:FSK:RATE.
WGENerator:MODulation:AM:FREQuency <Frequency>
Sets the frequency of the modulating waveform for AM modulation.
Parameter:
<Frequency>
WGENerator:MODulation:AM:DEPTh <ModulationDepth>
Sets the modulation depth, the percentage of the amplitude range that is used for AM
modulation.
Parameter:
<ModulationDepth>
WGENerator:MODulation:FM:FREQuency <Frequency>
Sets the frequency of the modulating waveform for FM modulation.
Parameter:
<Frequency>
WGENerator:MODulation:FM:DEViation <Deviation>
Sets the frequency deviation, the maximum difference between the FM modulated sig-
nal and the carrier signal.
Parameter:
<Deviation>
Signalerzeugung (Option R&S RTB-B6)
To Next Page
Loading...
