Rotax 914 F - 4) Magnetic Screw; 5) Drain Screw

ReferenceModification no.
- 0 -
Page
147
Date
1997 02 01
Main
914 F
01478
13.2.4) Magnetic screw
See Chapter 12.3.11).
13.2.5) Drain screw
See Pic. 100.
On crankcase bottom side there is a plug screw Q and a banjo screw W for
oil return line.
Remove both screws, drain remaining oil and check. Refit the cleaned
screws, tighten to 35 Nm (310 in.lb) and secure with safety wiring.
Pic. 100
2
1
00081