Reference
Modification no.
- 0 -
Page
17
Date
1997 02 01
Main
914 F
01476
4.4.1) Use for intended purpose
- The engine ROTAX
®
914 F is intended for use in certified aircraft. In case
of doubt the regulations of the national authorities or the respective
sportive federations have to be observed.
- This is a certified aircraft engine tested as per aeronautical standards for
safety and lifetime. It was developed to the latest state of the art and
intensively tested.
- Use for intended purpose also means respecting the prescribed opera-
tional- maintenance- and repair conditions. This also increases the en-
gine lifetime.
- Never run the engine without propeller, this causes inevitably engine
damage and hazard of explosion.
4.4.2) Instruction
Engines require instructions regarding their application, use, operation,
maintenance and repair.
Technical documentation and directions are useful and necessary comple-
mentary elements for personal instruction, but can by no means substitute
theoretical and practical instructions. These instructions should cover expla-
nation of the technical context, advice for operation, maintenance, use and
operational safety of the engine.
- This engine must only be operated with accessories supplied, recom-
mended and released by ROTAX
®
. Modifications are only allowed after
consent by the engine manufacturer.
- Before longer standstill (longer than 2 months) observe without fail the
instructions for engine "out of use". Protect fuel- and carburetor system
against contamination.
â– CAUTION: Spare parts must meet with the requirements defined by the
engine manufacturer. This is only warranted by use of
GENUINE ROTAX
®
spare parts and/or accessories (see
spare parts list).
They are available only at the authorized ROTAX
®
Distribu-
tion- and Service partners.
If using other than GENUINE ROTAX
®
spare parts and/or
accessories, any warranty by ROTAX
®
gets void (see
Warranty Conditions).
To Next Page
Loading...
Need help?
General
