Rotax 914 F - 11.3 Basic information

Reference
Modification no.
- 0 -
Page
69
Date
1997 02 01
Main
914 F
01476
11.3) Basic information
▲■ To warrant for correct servicing of the engine, the use of genuine spare parts is
required. Use of special tools, devices and lubricating media is necessary.
▲ WARNING: Only qualified personnel (authorized by the local airworthiness
authorities ) trained especially for this engine are allowed to
carry out the maintenance and servicing work.
▲■ Only use clean screws and nuts. Check the contact faces and threads for
damages. In case of doubt, use new screws and nuts.
■ Always replace self-locking nuts once unscrewed.
■ Respect without fail the tightening torques indicated in the respective table.
■ Replace all sealing rings, gaskets, lock washer, O-rings and oil seals at engine
re-assembly.